بسم الله الرحمن الرحيم
The tiny, powerful Intel Edison platform has been a bit difficult to
interface with. But now two new breakout boards from DFRobot vie to
become the robotics community’s must-have Edison connection.
The latest two breakout board offerings come from DFRobot, a Chinese
based company who offers all sorts of maker-related products. While
their new breakout boards may not be the obvious choice for all of your
Edison based projects, they certainly should be contenders, especially
if you are building a robotics platform.
 |
| Romeo breakout board for the Intel Edison |
The Romeo breakout board for Edison
The first new board by DFRobot is the
Romeo for Edison.
For those unfamiliar with the Romeo line of boards, they are
essentially a line of motor controllers with I/O breakouts to
accommodate most basic robotics needs. While there are other boards in
the Romeo line, this is the first board to accommodate the 70-pin Hirose
header for Intel Edison Looking closely at the board layout above,
you’ll notice the Romeo board breaks out header pins in an Arduino UNO
Rev. 3 fashion.
 |
| DC motor and batter connected to the Romeo breakout | | | | |
Above is a fine example of how this board is useful in rapid
prototyping — the Romeo board easily connects to a battery and DC motor,
something that’s not too easy with any individual extant breakout
board.
In addition to easy wiring, another great feature is that the board is Open Hardware, with available schematics.
 |
| Full schematic of the Romeo board |
The I/O Expansion Shield for Edison
The second board from DFRobot, the
I/O Expansion shield
is a more standard breakout board that pins-out familiar Arduino GPIO
(General Purpose Input/Output), though in an unfamiliar, linear
arrangement — this, however, is most likely done to keep the dimensions
of the board as small as possible.
 |
| IO Expansion Shield |
Unlike the smaller form factor board available from Intel, the DFRobot
board populates the header pins for ease and accessibility.
 |
| I/O expansion board description |
In addition to the low cost of this breakout board — at the time of
writing, below $14.00 — it is also Open Hardware, just like the Romeo
board, which cost quite a bit more — nearly $75.00.
Both boards are available now, however, DFRobot along with many
Chinese distributors is observing the Chinese New Year until February
25th and will not be shipping boards until that date.
I love to tinker and write about electronics. My days are spent building projects and working as a Technical Editor for MAKE.
// Taken from http://makezine.com/2015/02/23/two-new-intel-edison-breakout-boards-aim-to-power-your-robot/